spridgets
[Top] [All Lists]

Re: Distributor / timing question

To: Chuck Ciaffone <chuckc@attglobal.net>, "Charles D. Sorkin" <cdsorkin@ix.netcom.com>
Subject: Re: Distributor / timing question
From: Ron Soave <soavero@yahoo.com>
Date: Thu, 11 Nov 1999 06:43:19 -0800 (PST)
Cc: spridget list <spridgets@autox.team.net>
Reply-to: Ron Soave <soavero@yahoo.com>
Sender: owner-spridgets@autox.team.net
I've never had any problems either, but you might want
to invest in a set of "shorty" wrenches.  My
favorites.  And no height jokes please.

Ron
5'7 when it's warm and I'm stretchy

--- Chuck Ciaffone <chuckc@attglobal.net> wrote:
> I'm not sure I really understand the problem.
> 
> On my 1275, I loosen/tighten the dizzy clamp using a
> 7/16
> deep socket on a long extension approaching from the
> front of
> the engine at an angle. The nut on the dizzy clamp
> faces forward and
> up at an angle. The socket and shaft fit nicely
> between the oil
> bypass pipe and the side of the block.
> 
> chuck
> 
> 


=====
Ron Soave
"A Fool and His Money Can Throw One Hell of a Party"
1960 Bugeye
1972 BGT

<Prev in Thread] Current Thread [Next in Thread>