With the wheels I have I won't need spacers. They have a negative offset
of about 2 inches and I have lots of clearance on the inside. For this
reason and because I plan to autocross the car I want to upgrade the
studs.
Bill Hunt
64 MK II Sprite - HRBYTOY
-----Original Message-----
From: Kent J. Miller [mailto:Bushwacker4@prodigy.net]
Sent: Thursday, February 03, 2000 3:52 PM
To: Spridgets
Subject: Fw: Wheel Studs
I'm running 205/60/13s on 6 inch rims. I had to space
the wheels out 1/2
inch. I used standard knurl dimension studs that were
longer. Check your
clearance before you change your studs in order to make
sure they are long
enough if you need spacers.
Kent
1960 Bugeye
1976 Midget
Future old fart in an old car.
|