Rick: You work on turbines???? Gas turbines???? stationary or up-in-air
stuff? Always loved turbines, and wanted to put an APU in my Cessna 140. Money
got the better of me there, and probably common sense. Now I work with
stationary piston generators and am chafing at the chance to install some gas
turbines.
Geoff Branch '74 Meejut "yellow peril"
----- Original Message -----
From Carolyn/Rick <walters at mail.softcom.net>
To: Terry Williams <t.williams@mrg.ca>
Cc: <spridgets@autox.team.net>
Sent: Thursday, February 03, 2000 10:22 AM
Subject: Re: Valuable Tool Discovery
> Hi Terry,
>
> They also make some 12 pt crowsfoot, these are great because they don't strip
> the bolt head. I use them on Gas Turbines all the time. You thought things
> are tight on Spridget? Try working on these wonderful whirling dervishes. My
> favorite tool is a 18" 1/4 dr wobble extension. It gets your hands out of the
> way of where you are working.
>
> Cheers
>
> and keep them spinning as we say in the turbine business.
>
> Rick
>
> Terry Williams wrote:
>
> > One of this past Christmas gifts from loving significant (for 25 years)
> > other, was a set of 3/8 drive crowsfoot wrenches/sockets. Problem was, they
> > were metric, so after many long weeks of waiting, last weekend, they
> > finally arrived, just in time for the front brake hose replacement. For
> > those who may have tackled same, you know how tight space is near the
> > shock, and trying to get two 9/16 wrenches in there (one to hold the line
> > mounting bolt, the other to loosen the brass brake line nut (without
> > wrecking the line, or rounding the bolt) would have been virtually
> > impossible without these crowsfoot(feet?) socket attachments. Their design
> > allows grip around the nut, plus as a bonus, because they're slightly
> > open-faced, I was able to get over the bolt, line intact.
> >
> > You NEED a set of these, especially with the confines of the Midget. (No
> > financial yahda yahdah, YMMV etc.)
> >
> > Final result, RH side brake hose removal/replace no problem, driver's side,
> > weellll....thankfully, it's the shortest line (union to bulkhead) and will
> > be relatively easy to replicate & install, they sheared off at both mounts,
> > but here's the thing I discovered...
> >
> > On the passenger side, where the brass brake hose banjo joins the caliper,
> > the hose fits into a U-shaped retaining bracket (which is held in place by
> > the two bolts that mount the caliper) yet on the driver's side, this
> > bracket is reversed, and the U shape fits OVER the brass sleeve of the
> > hose? What's up with this? Could someone have replaced one side? Manuals
> > are vague, parts books only show the mounting bolts, not this/these
> > retaining mounts? Which is correct? Were there two types of hose retainers
> > at the caliper, LH & RH?
> >
> > Inquiring minds want to know.
> >
> > So, weekend results, two new shocks, two new brake hoses, one new tie rod
> > end.
> >
> > And now, it's on to rear spring/shock replacement....
> >
> > You need those wrenches!
> >
> > Terry 'Now With Crowsfeet In The Tool Chest, And The Eyes' Williams
> > Halifax, Nova Scotia
> > '77 MG Midget
> > '70 MGB BGT
> > '68 MGB roadster
>
> --
> 52 MGTD,Sparky 74 MGB, B-tris 76 XJ12 Coupe, Jacque
> 60 Bugeye, Puddles 58 MGA Coupe, Ruby
> http://www.softcom.net/users/walters
> http://www.geocities.com/Heartland/Acres/4644
>
>
|