spridgets
[Top] [All Lists]

Re: Speedo Drive Gear For 3.7 Diffy

To: "Graziano, Michael" <michael.graziano@csfb.com>, "'Spridgets'" <spridgets@autox.team.net>
Subject: Re: Speedo Drive Gear For 3.7 Diffy
Date: Fri, 4 Aug 2000 19:11:40 +0100charset="iso-8859-1"
References: <6FC6FF0C755BD31188410000F8BDBBF4E54261@snyc11312.corpny.csfb.com>
----- Original Message -----
From Graziano, Michael <michael.graziano at csfb.com>
To: 'Spridgets' <spridgets@autox.team.net>
Sent: 03 August 2000 21:41
Subject: Speedo Drive Gear For 3.7 Diffy


> All,
>
> I assume I have to change my speedo drive gear when I put the 3.7 diffy in
> the car.  ANyone know which is the 3.7 drive?  22 teeth (red), 21
> teeth(green), or 20 teeth (orange).  Is it as simple as changing the gear?
> Doesn't whatever drives it need to be changed as well so the teeth match?
> Or is the tooth spacing difference insignificant?  I would think the 22
> tooth gear is the one for the 3.7.  Why?  Cause it's the most expensive
one
> in the Moss catalog at $30 vs $17 for the other two.  Must be expensive
> teeth.
>
> Seriously,  I would think it's the 20 tooth gear as it wil spin faster
with
> 20 teeth than 22 teeth (only takes 20 teeth to make one revolution vs 22).
>
> Ideas/Opinions?
>
> Mike
Put a 1500 Midget driver (red) into an Ital box on my own car.  Did about 10
yards.


<Prev in Thread] Current Thread [Next in Thread>