A nautical term comes to mind....
Jeff Boatright wrote:
> What happens if you don't install performance springs?
>
> At 1:12 PM -0400 10/25/00, mgraziano@mindspring.com wrote:
> >You can try Elgin Cams at www.elgincams.com
> >
> >This is what they have listed.
> >
> >AUSTIN HEALY SPRITE, MG MIDGET, AND MINI PROFILES
> >ìAî SERIES 848-1275cc ENGINES. TAPPET DIAM. = .812 STD ROCKER RATIO =
>1.25:1 BMC A SERIES CAMS ARE 5 DEGREES RETARDED FROM THE FACTORY. OFFSET
>KEYS REQUIRED TO CHANGE CAM TIMING. NITRIDING STRONGLY RECOMMENDED FOR ALL
>BMC RACING CAMS.
> >GRIND SEAT .050î CAM LASH APPLICATION
> >NO. DURATION DURATION LIFT
> >66-15 264 217 0.262 I .015 ONE STEP UP FROM STOCK.
> > +E .017
> >
> >67-18 268 222 0.289 I .018 1275 NEEDS PERFORMANCE SPRINGS
> > E .020
> >
> ...
>
> _____________________________________________________________
> Jeffrey H. Boatright, PhD
> Assistant Professor, Emory Eye Center, Atlanta, GA, USA
> Senior Editor, Molecular Vision, http://www.molvis.org/molvis
> mailto:jboatri@emory.edu
|