Re: gaskets

> the archives. For the cork valve cover gasket,
> should one pre-soak in 
> motor oil, or just smear lithium grease on both
> surfaces, or install 
> dry? 

Jeff, I just put a tiny bead of RTV on the side that
mates to the valve cover, let it setup for a little
bit, then bolt it down.  never had a leak, and the RTV
makes it real clean to pop the cover off and on.

=====
Ron Soave
"Driver Carries No Cash"
Yahoo! Auctions - Buy the things you want at great prices.
http://auctions.yahoo.com/