spridgets
[Top] [All Lists]

Front End Parts Questions

To: spridgets@autox.team.net, MIME-Version:
Subject: Front End Parts Questions
Date: Tue, 20 Mar 2001 16:42:00 -0800
I'm refurbishing/refitting the front end of my '67 Sprite and found a few 
interesting (?) things leading to some questions.

For the ORIGINAL EQUIPMENT FREAKS:  Both steering arms (p/n BTA648/9) are 
painted bright green (brighter than MG engine paint).  This is under the 
dealer applied "undercoat".  Is this original?

The kingpin cork seals had 'perished', and the 'cotters' (taper pins) 
required the attention of a large (5 ton) press to be (as stated in an 
Autobooks Manual), "tapped out to release the fulcrum pins".

The fulcrum pins appear to not have been hardened; that is, they are worn 
down by nearly 0.10" on one side of both threaded ends WITHOUT significant 
wear of the threaded bushes in the end of the A-arm (play is within spec 
with new fulcrum pins).

Painting and re assembly is proceeding.

Clay La Baw

///
///  (If they are dupes, this trailer may also catch them.)


<Prev in Thread] Current Thread [Next in Thread>