It can be done with a long extension on the master cylinder side and a box,
open end wrench or maybe a socket on the pushrod side. I did it just a few
weeks ago. Hold the pushrod side while operating the rachet on the other.
It's a little trickier getting the nut back on during assembly but do-able
At 7:11 PM -0400 6/16/01, Bill Gilroy wrote:
>Subject says it all. The only way I can see to remove the bottom
>bolt that holds the clutch master cylinder to the pedal box is to
>unbolt the pedal box and get access from the bottom with an open end
>wrench. I think that is what what Haynes means by remove the two
>bolts holding the master cylinder to the pedal box :-)
>Anyone have an easier way? BTW, this is on a 1500 Midget.
> Bill mailto:email@example.com
>"Facts are the enemy of truth"
Please visit Four Points Travel -
Discount Online International Travel Reservations
To make a reservation please call Toll Free 1-800-272-3253
G G Gerard Chateauvieux
R R firstname.lastname@example.org
R G Pixelsmith on Duty