spridgets
[Top] [All Lists]

Re: 1275 to 1380? TR Carbs on the Spridget?

To: David Riker <davriker@pacbell.net>
Subject: Re: 1275 to 1380? TR Carbs on the Spridget?
Date: Sat, 21 Jul 2001 08:31:04 -0500
Cc: "Jeffrey H. Boatright" <jboatri@emory.edu>, SDOliner@aol.com, spridgets@autox.team.net
References: <8b.9859676.2888fe6c@aol.com> <a05010403b77d563450bf@[10.0.1.17]> <00ab01c111a1$ee439d60$c4aefea9@pavilion> FILETIME=[4033E700:01C111E9]
David Riker wrote:

> Many touched on the piston size, it is 73.5mm.

Exactly how thick are the remaining walls? Has any one read about Vizards'
solution to thin cylinder walls? Sure it adds a few pounds, but makes up for it
by greatly reducing cylinder wall flex.



<Prev in Thread] Current Thread [Next in Thread>