That won't happen.
Only one valve was dry. It was on #2 ( on the left ).
The guy turned the head upside down, poured some varsol? into the recesses
and checked to see if it would leak past the valves. A couple of drops
seemed to. About an hour later, after the tour of the shop and some
gabbing, it still had not leaked.
Number 2 piston can be pushed around in the cylinder much more freely than
the other pistons.
Robert D.
-----Original Message-----
>From: Daniel1312@aol.com <Daniel1312@aol.com>
>
>>Sorry, but it all it tells me is that you need a macro lense for your
>camera
>>:-(
>>
>>Daniel1312
>>
>>In a message dated 04/08/01 04:48:40 Pacific Daylight Time,
>>RobertDuquette@Sympatico.ca writes:
>>
>><< Does this picture spell anything out to anyone? ( If so please tell
>e. )
>>
>> http://www3.sympatico.ca/robertduquette/temp/number2.jpg
>>
>> #2 is the one in the cent >>
|
