spridgets
[Top] [All Lists]

Re: Midget brake shoe query...

To: "Louis Mehr (SEM)" <Louis.Mehr@eml.ericsson.se>, "'spridgets@autox.team.net'" <spridgets@autox.team.net>, "'mgs@autox.team.net'" <mgs@autox.team.net>
Subject: Re: Midget brake shoe query...
Date: Mon, 26 Nov 2001 08:49:02 -0800
Louis,

All your observations are correct for how they should be fitted. The long
hook of the top spring goes toward rear of the car.

Gerard

At 12:40 PM +0100 11/26/01, Louis Mehr (SEM) wrote:
>Hi Listers,
>
>I was finally about to refit my brake drums after fitting a new brake
>master cylinder and some pipes when I noticed that the springs on the
>shoes were catching the hub as it rotated.
>
>Checking in the Haynes guide & Moss catalogues I saw that the spring/drum
>arrangement was shown fitted quite differently  compared to my car and
>concluded that the previous owner had not fitted the shoes correctly.  It
>was clear:
>
>(i) that the springs are handed (I don't know if the springs fitted are
>correct)
>(ii)that the springs sit behind the shoes (mine were on top)
>(ii)that the shoes are supposed to lie in opposite directions (mine
>weren't i.e. the two thin slots were at the top & sat either side of the
>wheel cylinder)
>
>I'm not sure why someone would install shoes in this manner. Does anyone
>have pictures of both LHS and RHS drums fitted correctly?
>
>I know this is all simple stuff but I've never worked on brake drums before.
>
>Thanks in advance,
>
>Louis Mehr, Manchester, UK
>RHD 71 Sprite with 1098 engine.

--
Please visit Four Points Travel -
Discount Online International Travel Reservations
http://www.gerardsgarage.com/fourpoints
To make a reservation please call Toll Free 1-800-272-3253


G G              Gerard Chateauvieux
 E A
  R R        pixelsmith@gerardsgarage.com
   A A
    R G          Pixelsmith  on  Duty
     D E
      S      http://www.gerardsgarage.com



<Prev in Thread] Current Thread [Next in Thread>