Thanks to Rick, Brad & Frank. I was able to solve my dilema. I found that
there are 2 small phillips screws #0 holding the switch to the cylinder.
Upon removing the switch portion I found the copper pads on the White/red
wire almost worn through the others are just as bad almost. I'm going to
try and solder the pad and re file it to shape. But i'm betting I just need
to replace this lil guy. Thanks for the help.
Charlie Shelden
69&71 Midgets
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|