spridgets
[Top] [All Lists]

Re[2]: Testing a coil

To: Clayton La Baw <clabaw@jpl.nasa.gov>
Subject: Re[2]: Testing a coil
Date: Sun, 31 Mar 2002 19:57:54 -0500
Cc: spridgets@autox.team.net, Frank Clarici <spritenut@Exit109.com>, Kevin Valntine <valntine@ptd.net>
References: <7999791943.20020330200539@verizon.net> <7999791943.20020330200539@verizon.net> <5.1.0.14.2.20020331120614.0212f120@mail1.jpl.nasa.gov>
Hello Clayton,

Sunday, March 31, 2002, 3:12:37 PM, you wrote:

CLB> Bill -

CLB> I've told this story a dozen times, but here goes.  After symptoms just 
CLB> like you described (suddenly OFF with no warning) I replaced the 
CLB> rotor.  Two weeks later, the same thing.  Repeat four times.  I finally 
CLB> noticed that the "Genuine Lucas" rotors were a very snug fit on the 
CLB> shaft.  I relieved the 'locater lump' inside the rotor by 10 thou or so 
CLB> with a Dremel.  The latest rotor has lasted since last year and still 
going.

Interesting.  The rotor I took off fit so tight I had to use a pair of
pliers to get it of the shaft.  Just one other data point.

-- 
Best regards,
 Bill                            mailto:w.gilroy@verizon.net

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets


<Prev in Thread] Current Thread [Next in Thread>