We knew that Paul, the question is how can you tell if it's one or the
other if the serial # plate is missing and you don't want to drop the pan.
Bob was asking me if you can tell by the casting number on the block.
Gerard
At 8:31 PM -0700 6/19/02, Paul A. Asgeirsson wrote:
>The 10CC is the 2" main engine, the 10CG is the 1 3/4" main one.
>
>Paul A
>
>Gerard wrote:
>
>> Don't know offhand. I have a 10CC block around but not a 10CG so I can't
>> compare if the numbers are same of different.
>>
>> Paul Asgeirsson will probably know.
>>
>> Gerard
>>
>> At 2:33 PM -0400 6/19/02, Robert E. Shlafer wrote:
>> >"Pixelperson"
>> >
>> >I wonder if you might be able to help me
>> >out?
>> >
>> >The 1098 engine I pulled and replaced with my Rivergate 1293 has the
>> >following
>> >number on the left, middle, rear of the block:
>> > 12G432
>> >
>> >Is there any way this number can be used
>> >to find out whether the engine is the "small main" or "large main" 1098
>> >as
>> >unfortunately, the engine came without
>> >it's identification "plate".
>> >
>> >
>> >
>> >
>> >Cap'n. Bob
>> > '60 :{)
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|