spridgets
[Top] [All Lists]

Re: 1098 engine....CC or CG? Jun 2002 21:27:52 -0700

To: pixelsmith@gerardsgarage.com (Gerard)
Subject: Re: 1098 engine....CC or CG? Jun 2002 21:27:52 -0700
Date: Thu, 20 Jun 2002 00:59:05 -0400 (EDT)
Cc: Pasgeirsson@worldnet.att.net (Paul A. Asgeirsson), spridgets@autox.team.net
Exactly so, Gerard.....

Thanks anyway, Paul, but it just looks like
I'm gonna have to open it up and find out!!

So be it....darn thing runs so damn well
I just can't throw it away. Well worth having around as a spare but
especially
so if it's a "CC".

My new 1293 runs pretty smoothly and
produces far more serious "vibrations",
even at 8.3-1 but, nothing matches the
silky smoothness of the little 1098 it
replaced.




Cap'n. Bob
    '60 :{)  
Received: from smtpin-2202.public.lawson.webtv.net (209.240.213.132) by
  storefull-2176.public.lawson.webtv.net with WTV-SMTP; Wed, 19 Jun 2002
  21:48:38 -0700 (PDT)
Received: from sm0101.promedia.net (sm0101.promedia.net [208.131.40.4])
  by smtpin-2202.public.lawson.webtv.net (WebTV_Postfix+sws) with ESMTP
  id B91CDFE20 for <PilotRob@webtv.net>; Wed, 19 Jun 2002 21:48:37 -0700
  (PDT)
Received: from [209.209.93.34] (ppp-209-209-93-48.16.softcom.net
  [209.209.93.48]) by sm0101.promedia.net (8.11.6/8.11.6) with ESMTP id
  g5K4mZx30978; Wed, 19 Jun 2002 21:48:35 -0700
References: Gerard <pixelsmith@gerardsgarage.com>'s message of Wed, 19
  Jun 2002 09:04:11 -0700 <v0313032db936ca1bff84@[209.209.93.34]>
Date: Wed, 19 Jun 2002 21:27:52 -0700
To: "Paul A. Asgeirsson" <Pasgeirsson@worldnet.att.net>
From Gerard <pixelsmith at gerardsgarage.com>
Subject: Re: 1098 engine....CC or CG?
Cc: "Robert E. Shlafer" <PilotRob@webtv.net>, spridgets@autox.team.net

We knew that Paul, the question is how can you tell if it's one or the
other if the  serial # plate is missing and you don't want to drop the pan.
Bob was asking me if you can tell by the casting number on the block.

Gerard

At 8:31 PM -0700 6/19/02, Paul A. Asgeirsson wrote:
>The 10CC is the 2" main engine, the 10CG is the 1 3/4" main one.
>
>Paul A
>
>Gerard wrote:
>
>> Don't know offhand. I have a 10CC block around but not a 10CG so I can't
>> compare if the numbers are same of different.
>>
>> Paul Asgeirsson will probably know.
>>
>> Gerard
>>
>> At 2:33 PM -0400 6/19/02, Robert E. Shlafer wrote:
>> >"Pixelperson"
>> >
>> >I wonder if you might be able to help me
>> >out?
>> >
>> >The 1098 engine I pulled and replaced with my Rivergate 1293 has the
>> >following
>> >number on the left, middle, rear of the block:
>> >                     12G432
>> >
>> >Is there any way this number can be used
>> >to find out whether the engine is the "small main" or "large main" 1098
>> >as
>> >unfortunately, the engine came without
>> >it's identification "plate".
>> >
>> >
>> >
>> >
>> >Cap'n. Bob
>> >    '60 :{)

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets


<Prev in Thread] Current Thread [Next in Thread>
  • Re: 1098 engine....CC or CG? Jun 2002 21:27:52 -0700, Unknown <=