spridgets
[Top] [All Lists]

Re: More on rod bearings

To: david@vermonthardwoods.com, spridgets@autox.team.net
Subject: Re: More on rod bearings
Date: Tue, 1 Oct 2002 21:41:15 EDT
In a message dated 10/1/02 4:34:50 PM Eastern Daylight Time, 
david@vermonthardwoods.com writes: 
> Anyways, they
> seemed to bolt up fine and it seems to turn over well.

If it does that then you have 'em in right.  If you get them backwards they 
will not turn, but will contact the side of the block.

--David C.

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets


<Prev in Thread] Current Thread [Next in Thread>