spridgets
[Top] [All Lists]

Re: Brake bore

Subject: Re: Brake bore
Date: Thu, 07 Nov 2002 13:57:49 -0500
Cc: spridgets-digest@autox.team.net, "spridgets@autox.team.net" <spridgets@autox.team.net>
References: <1ac.b936c04.2afc0361@aol.com>
The filler neck on top.

Insert a narrow metal ruler into to the filler and measure to the top of the
filler neck.

PS Remember to remove the cap first.

jay f


JRLNJ@aol.com wrote:

> <PRE>Where do measure the brake bore on the master cylinder?  The two front
> openings, or the filler neck on top?

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets


<Prev in Thread] Current Thread [Next in Thread>