forgot to remove trailer when forwarding....duh!
chuck
read reply below, please.
----- Original Message -----
From "Charles Christ" <cfchrist at earthlink.net>
To: "bill b." <w_burrell@yahoo.com>; "spridget list"
<spridgets@autox.team.net>; "midgetsprite group"
<midgetsprite@yahoogroups.com>
Sent: Thursday, December 19, 2002 12:08 PM
Subject: Re: Teflon tape and brake fluid
> never -never - never use teflon tape on hydraulic pressure fittings. it
can
> hide a serious problem wich will "bite" you when you least expect it. if
> you have a leak, find out what is wrong and fix it! using the tape to
ease
> disassembly is not an option. try using hydraulic rubber assembly grease
if
> you feel a need to lubricate a fitting during assembly or to hopefully aid
> future disassembly. (or possibly a waterproof silicone grease?) but
never
> use teflon tape in brake or clutch hydraulics. you could end up with a
> catastrophic failure under pressure when you least expect it(with very
> unsavory results!).
>
> chuck>
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|