If you decide you need a new spindle, let me know. Dave removed the drum brakes
off the 62 DragSprite, (upgraded to disc) so I can get those from him if need
be.
Brad
endicar@attbi.com wrote:
> For the last couple months I've been going through the suspension and brakes
> on my 62 drum brake midget. When removing the left side front hub the inner
> wheel bearing and grease seal stayed on the spindle. The bearings are not
> the originals, but are the funky new style that the previous owner had
> installed. It was stuck on enough that I used the hub puller to loosen it
> from the spindle. Also it appears from the coloration of the outer race
> that the bearing had been slipping some. The spindle looks fine, but should
> I be concerned enough by this to have the spindle magnafluxed for cracks?
> Anyone else experienced this problem with newer bearings.
>
> Thanks,
>
> Matt Endicott
> 62 Midget Gan1L 15988
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|