> Very true - I made the (probably incorrect) assumption
> that he was going with the same rocker ratio.
Yeah, Ron, he did say "Titan 1.625 roller rockers" in there somewhere.
I take it that the issue is that the actual amount of clearance between the
cam lobe and the cam follower needs to remain the same, but that, since we
cannot measure it there, the measurement that we see at the valve stem
varies with the rocker ratio.
David Lieb
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|