David Lieb wrote:
> I would really rather that it
> not be coated in rust when I do find a use for it. Do I find a five-gallon
> bucket with a lid and cover it in used motor oil or what? Any ideas?
Spray it down with spray white lithium grease, but NOT the kind that
uses water as a propellent. It's out there and the grease stays on top
of the water and the metal rusts. BTDT and then read the can.
Stick it in an old canvas bag or something strong like that. Do NOT
cover it in plastic as it will condensate inside the bag and rust.
Of course submersed in oil in a spackle bucket would work too but when
you move the bucket and stick it over that nail sticking up, you're
gonna have a mess. Or if you should "kick the bucket"......
--
Frank Clarici
Toms River, NJ
Down to just a few Sprites
http://www.exit109.com/~spritenut
|