> So.... If a DFPO had stripped all 3 front shock mounting holes, drilled
> and tapped them to 1/2", and drilled out the shock holes to match, (and
> you need to replace the shocks otherwise) would you....
> a) Replace the shocks and drill the replacements? (there are good
> reasons to NOT do this, shock-wise)
>
>I would Helicoil or use another brand to get the holes back to 3/8". It
would be as safe as original.
Good luck!
Roger Cotting
60 Bugeye "Ironhead"
60 Bugeye project car
74 Midget sons car
80 TR8
95 Mitsu 3000GT "undergoing timing belt change"
79 Chevy pick up "Green Grunt"
|