The contacting springs on the fuse may have some corrosion on them. I have had
that
happen before, wiggle the fuse, and all is well.
SDOliner@aol.com wrote:
> In a message dated 6/28/2004 8:32:45 PM Eastern Standard Time,
> robert.g.cummins@ua.edu writes:
> Any ideas?
> No power at the "power side" of the fuse. See if you have power out at the
> brake switch. "power in" and then "power out" if you understand what I am
>trying
> to say.
>
> no power at the "power out" side of the fuse, clean the connections, check
> the fuse. I have never heard of a fuse box failure. Not a lot in there to
>break.
>
> David Oliner
|