mine did that (twice) and its a daily driver road car.
Second time I welded thicker plates on the underside of the chassis rails
but it does concern me that I may just transfer the problem to the next weak
point in the line....
----- Original Message -----
From <mg72racer at juno.com>
To: <firstname.lastname@example.org>; <email@example.com>
Sent: Monday, September 13, 2004 4:41 PM
Subject: Sprite Friendly Race Tracks
The sway bar mounts have torn
> away from the chassis rails. Nice round holes running down each side of
the sheetmetal where the spot welds used to be.
> Lesson Two: Extended running near the redline isn't the only way to
abuse a race car.
> Mal Fay
> #72 Spridget
Check out the new British Cars Forum: