Excellent advice. Thanks!
rick
>
> I wouldn't suggest using NitroStan, it's a laquer based filler, good 40
years ago but not today. Unless you will be using laquer throughout...
>
> You really should be using a polyester glaze like glaze coat or metal
glaze which cures with a hardener and is compatable with todays urethanes.
Does the same thing, fills pinholes and minor imperfections.
>
> J
> -------------- Original message -------------- > > tiny bubbles and
scratches left in body filler > > (Bondo). > > > > Thanks
for this thread. I have a car that it >> Mine is the black BMW (sans
rear glass) two > > cars left of the Jeep CJ. :-[ > > > >
http://www.stoolhead.com/Hail1.jpg > > > > rick > > >
>
|
