[Top] [All Lists]

Re: Steering column threads

To: Mike Aarset <mike.aarset@gmail.com>, Mike Rambour <mikey@b2systems.com>
Subject: Re: Steering column threads
Date: Mon, 4 Apr 2005 11:05:49 -0600
Cc: spridgets-owner@autox.team.net, spridgets@autox.team.net
References: <d8c25fb9050403232673b8ad8e@mail.gmail.com> <> <d8c25fb90504040738ee2ca0a@mail.gmail.com>
If the problem is that the first few threads are mangled, you can always 
carefully file the offending threads flat and cut a proper "ramp" into the 
good threads.

On Mon, 4 Apr 2005 07:38:03 -0700, Mike Aarset wrote
> We tried that with no luck.
> On Apr 4, 2005 12:23 AM, Mike Rambour <mikey@b2systems.com> wrote:
> > 
> > >Anyone know what tap and die tool I can use to re-thread
> > >the column so I can get a nut on to hold the steering wheel?
> > 
> >  Thread file, its a small square file with different threads on each side,
> > match it up and file the threads back into shape.
> Your messages not reaching the list?
> Check out http://www.team.net/posting.html

<Prev in Thread] Current Thread [Next in Thread>