To: | "Bugeye" <bugeye@yahoogroups.com>, "Spridget" <spridgets@autox.team.net> |
---|---|
Subject: | More Engine Smoke Question Info |
Date: | Tue, 28 Jun 2005 14:03:58 -0700 reply-type=response |
References: | <030601c57c17$221e72c0$e30c0618@HP> <000601c57c20$ea218470$6664640a@vgl.cvg.ucdavis.edu> |
Running a vented oil filler cap and it's not plugged. All of the PCV stuff appears to be clear and the engine speeds up when the oil filler cap is removed. Engine has Pierce roller rockers and stock pushrods. Oil does puddle a little at idle and comes up to the bottom coil on the valve springs. Takes about 30 seconds for it to drain back down when engine is shut off. Rockers and shaft have about 3K miles on them. I don't remember the ratio right off hand but they are not considered "high" lift but they are higher than stock. Valve clearances are set about .002 on the loose side. Larry |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Engine Smoke Question, Unknown |
---|---|
Next by Date: | RE: Aussie-US Healey Challenge, Unknown |
Previous by Thread: | Engine Smoke Question, Unknown |
Next by Thread: | Re: More Engine Smoke Question Info, Unknown |
Indexes: | [Date] [Thread] [Top] [All Lists] |