spridgets
[Top] [All Lists]

Re: Custom Fiberglass Front Ends

To: tequila.brad@gmail.com, midgetsprite@yahoogroups.com
Subject: Re: Custom Fiberglass Front Ends
Date: Sun, 30 Oct 2005 22:46:25 EST
Cc: spridgets@autox.team.net
I've worked with Spridgetech, and if they say they can make the custom  
fiberglass front end that you need, then it "will be done".  But make sure  
that 
you give them lots of time....Rod never met a deadline he couldn't  stretch!
 
Steve
'74 Midget
------------------------------------------------------------------------------
--------------------------------------------------------
With the Drag Sprite finally making it's way down the track, it needs  a
front end to complete the body. The original plan was to have a rotary  in
it, but the engine cooked, and a SBC found it's way into the body in  it's
place. This involved stretching the nose 19" to get things just so.  This
winter, Dave is going to set back some funds to get a custom nose, with  an
additional 19" going back to the cowl made. Spridgetech is saying they  can
do it. Do any of you know anything about their work, or want to  recommend
another company?
TIA,
Brad
btw, it is doing 6.70 through  the 1/8th mile, at 99.4 mph




<Prev in Thread] Current Thread [Next in Thread>