spridgets
[Top] [All Lists]

Re: Repro Radiator Bolts

To: <spridgets@autox.team.net>
Subject: Re: Repro Radiator Bolts
From: "Chris King" <cbking@alum.rpi.edu>
Date: Mon, 10 Apr 2006 16:11:38 -0700
But 1/4-28 for the captive nuts on the sheetmetal.
 
-=Chris

<-----Original Message----->

                 From: Frank Clarici
Sent: 4/10/2006 7:07:57 PM
To: spritenut@comcast.net
Cc: bmwwxman@gmail.com;type79@ix.netcom.com;spridgets@autox.team.net
Subject: Re: Repro Radiator Bolts 

Frank Clarici wrote: 

> Jim Johnson wrote: 
> 
> 
>> I wasn't too clear there, was I? Four total bolts, two of each 
>> length, same thread on all. They are smaller than the 5/16-24 that 
>> held the original radiator in so I'm guessing maybe 1/4-28? 
> 
> 
> 1/4-28 is original. 
> 

Oops. Original to the down flow. 5/16 is for the cross flow or 10/32s on
the sheetmetal of a cross flow. 

-- 
Frank Clarici  
. 




<Prev in Thread] Current Thread [Next in Thread>