spridgets
[Top] [All Lists]

RE: Chasing the Paul A curse

To: "'Bob Van Kirk'" <racerbob70@yahoo.com>
Subject: RE: Chasing the Paul A curse
From: "Wm. Severin Thompson" <wsthompson@thicko.com>
Date: Fri, 23 Jun 2006 10:42:27 -0500
Nothing looks out of the ordinary in the recess. A anumber of plungers and
springs were tried.

We'll not know about cam bearing issues until I tear it down.

-----Original Message-----
From: Bob Van Kirk [mailto:racerbob70@yahoo.com] 
Sent: Friday, June 23, 2006 10:25 AM
To: Wm. Severin Thompson
Subject: Re: Chasing the Paul A curse


WST,

  Make sure someone hadn't put several pennies or
washers in the recess behind the cap that holds the
spring into the block!!!!!
  Don't forget the cam bearing oil hole also.
  Maybe, just maybe, wrong pressure spring!  Try
measuring the amount of pressure at say 1/4 inch of
travel....




<Prev in Thread] Current Thread [Next in Thread>