Drill out the clutch pushrod and pedal to 25/64" find a 3/8" clevis pin.
Grease & reinstall.
----- Original Message -----
From: "David Ambrose" <email@example.com>
To: "Spridgets List" <firstname.lastname@example.org>
Sent: Monday, August 14, 2006 8:34 PM
Subject: Clutch pedal
> We've traced our clutch problem to a seriously worn clutch pedal. The
> hole where the clevis pin goes is oblong and adds about another 1/4 inch
> of play at the master cylinder.
> Is there any way to repair the pedal without welding?
> Alternatively, does anyone have a good clutch pedal they'd like to sell?
> Dave Ambrose