spridgets
[Top] [All Lists]

Throttle linkage

To: <Spridgets@autox.team.net>
Subject: Throttle linkage
From: "Phil Nase" <nase@ptd.net>
Date: Mon, 21 Aug 2006 20:58:32 -0400
I have a set of 1.5" SU carbs on the 1275.  The throttle cable and choke
cable attach to the carbs with a pin that has a hole for the cable and a nut
that pinches the cable against the carb linkage.  Whether it's correct or
not I don't know but that's what I have.  Once tightened the darn things are
almost impossible to remove because the cable gets crimped and the nut and
pin are so soft the heads twist off.  Can anyone offer a better method of
securing the cables so they don't slip?


Phil Nase
http://home.comcast.net/~philnasecpa




<Prev in Thread] Current Thread [Next in Thread>