spridgets
[Top] [All Lists]

Re: Spridget Windscreen Troubles

To: <spridgets@autox.team.net>
Subject: Re: Spridget Windscreen Troubles
From: "Chris King" <cbking@alum.rpi.edu>
Date: Tue, 3 Oct 2006 16:35:05 -0700
I went through this experience this past spring. Tapered drift pins are
your friend!
 
-=Chris

Chris King 
http://home.comcast.net/~kvcbk/ 

 <-----Original Message----->

                 From: john.dagostino@comcast.net
Sent: 10/3/2006 10:26:39 AM
To: macy@bbl.med.upenn.edu;macy@bbl.med.upenn.edu;bmwwxman@gmail.com
Cc: spridgets@autox.team.net
Subject: Re: Spridget Windscreen Troubles 

I had ths same problem on my car. It took a lot of pushing, pulling,
cursing and the use of a drift pin in the holes to pry down the
windshield. 

-------------- Original message -------------- 
From: "Larry B. Macy, Ph.D." 

> Sit on it?? 
> 
> Larry 
> 
> On Oct 3, 2006, at 09:59 AM, Jim Johnson wrote: 
> 
> > I'm trying to replace the windscreen on my MKIII Midget with one I
got 
> > from a donor parts car. I have replaced the rubber fittings with
new. 
> > I am unable to get the two end posts far enough down into the holes
in 




<Prev in Thread] Current Thread [Next in Thread>