spridgets
[Top] [All Lists]

Re: engine driven with no oil

To: "David Lieb" <dbl@chicagolandmgclub.com>, "Spridgets"
Subject: Re: engine driven with no oil
From: "Paul Asgeirsson" <PAsgeirsson@worldnet.att.net>
Date: Fri, 6 Apr 2007 13:15:53 -0700
A really cheap way to check it out, is to install a new filter, filled
first, and 3 or 4 qts of 20-50.  Crank til oil pressure, then start it.  If
it's toasted, at least you've got clean oil everywhere!  Might be OK, too
Just depends on how soon it was shut down after oil loss.

Paul A

----- Original Message ----- 
From: "David Lieb" <dbl@chicagolandmgclub.com>
To: "Spridgets" <spridgets@autox.team.net>
Sent: Friday, April 06, 2007 11:05 AM
Subject: Re: engine driven with no oil


> > so, what am I looking at here? can I just keep driving the car (with
oil),
> > should I imediately change the bearings and inspect the crank? any
> > sujestions?
>
> Time to upgrade to Wife 2.0?
> I would say that the safe approach is to drop the pan and replace
> the bearings. Not worth risking damaging the crank (if not already
> too late) IMHO.
> David Lieb




<Prev in Thread] Current Thread [Next in Thread>