spridgets
[Top] [All Lists]

Re: Mid-Range RPM miss

To: derf <derf247@gmail.com>
Subject: Re: Mid-Range RPM miss
From: Mike/Donna Carpenter <mail4carpenters@peoplepc.com>
Date: Mon, 7 May 2007 15:57:34 -0400 (EDT)
HiDerf,

New rotor, new cap, and new wires.  They are silicone wires as I can no longer 
find the old type.  Could that be doing any of the miss?

Thanks,

Mike C

-----Original Message-----
>From: derf <derf247@gmail.com>
>Sent: May 7, 2007 3:37 PM
>To: Mike/Donna Carpenter <mail4carpenters@peoplepc.com>
>Cc: Bill L <pythias@pacifier.com>, spridgets@autox.team.net
>Subject: Re: Mid-Range RPM miss
>
>>
>> Dashpot oil shouldn't have any effect as some racers even run without any in 
>the SUs.
>>
>
>Aha.  What works for racers turning high RPMs and what works on the
>street are not the same.
>
>Still, your problem doesn't sound dashpot related.
>
>Look closely at the rotor and the cap/rotor combo.  Replace them.
>Could be a simple cap retaining clip loose.


________________________________________
PeoplePC Online
A better way to Internet
http://www.peoplepc.com




<Prev in Thread] Current Thread [Next in Thread>