Hello MICHAEL,
if you have the instructions for the crane then you know you
can tape the plug wire to the side of the block with about 3/8"
gap FROM the block, spin the dizzy (or loosen the optic eye and
move that.. its how you set the initial timing) so that the
shutter moves past the eye and you should get spark.. you can
do static timing by using #4 cylinder instead of #1 as they
are 360 degrees apart in firing.... if you can get #4 to arc,
you should be able to TEST #1!...
--
Best regards,
Bill mailto:pythias@pacifier.com
"66 Sprite
_______________________________________________
Edit your replies
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|