spridgets
[Top] [All Lists]

Re: [Spridgets] valve guides

To: a_d_webster@yahoo.com.au
Subject: Re: [Spridgets] valve guides
From: Daniel1312@aol.com
Date: Tue, 28 Aug 2007 05:29:24 EDT
aha a 1098 part, strange territory for me - 6K 927 but Ooops they fitted them 
to the 1275 as well 12A 1381.  I can't see I've seen them - will have to have 
a look on my Marina & Ital engines to see if they carried on using them.

The very last time I tried to use a lock tab was on a diff and while torquing 
up with a torque wrench for a minute I thought I'd stripped a thread but then 
saw what was happening to the lock tab.

Daniel1312



In a message dated 28/08/07 03:28:18 GMT Daylight Time, 
a_d_webster@yahoo.com.au writes:

> Subj: Re: [Spridgets] valve guides 
>  Date: 28/08/07 03:28:18 GMT Daylight Time
>  From: a_d_webster@yahoo.com.au
>  To: Daniel1312@aol.com, spridgets@autox.team.net
>  Sent from the Internet 
> 
> 
> 
> They were there when i pulled it apart, and I remember them being in my 1098 
> bottom end too.
>  Thumbnail sized and shaped, supposed to be bent over the bolt head after 
> torquing the bolt.
>  I bought 2 types from 2 stores, 1 was symmetrical, 1 was not symmetrical, 
> both sucked. The material is too soft, and the holes drilled too close to the 
> straight edge so it cant butt up against the flat edge of the bearing cap 
> when the bolt is in place... meaning that one tiny corner of the tab bears 
>all 
> the rotational force of torquing the bolt, and eventually folds up, allowing 
> the tab to rotate with the bolt and causing much swearing and annoyance.
>   
> A local mini guru told me yesterday (as I was showing off my new ARP studs) 
> that he leaves the tabs out and always uses some loctite.
>  ( he has a very intereting engine project cooking at the moment.... a DOHC 
> A-series with a choice of 8 or 16 valves)
>  andy
>  
> 
> Daniel1312@aol.com wrote:
>  
> >> I didn't think lock tabs were ever used with main bearing bolts for the 
>> reasons that you have discovered?
_______________________________________________

Edit your replies

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>