spridgets
[Top] [All Lists]

Re: [Spridgets] universal joint

To: Spridgets <spridgets@autox.team.net>
Subject: Re: [Spridgets] universal joint
From: "Dave G." <dmg@bossig.com>
Date: Mon, 24 Sep 2007 17:16:18 -0700
I've usually had good success using a deep socket, the U-joint and a good 
vice.
As long as the cup that doesn't have the socket is on the clear.
The cup usually comes out quite a bit and then I use a BIG vice-grips to 
wiggle it out.
Then there's usually enough room to get the cros piece out...

YMMV

-
Dave G
'65 MKIII Sprite
_______________________________________________

Edit your replies

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>