Hi Mike,
I did it on my Bugeye but you're right it's real close so you can't get much
of a turn on the wrench. When your hands go numb from holding them over
your head, take a break;)
Phil Nase
Quakertown, PA
http://home.comcast.net/~philnasecpa
Anybody had to replace the slave cylinder on Paul's 5 speed conversion with
the engine and trans in the car? I have a leak in this area of my Bugeye of
fresh brake fluid. It may or may not be the slave cylinder.
Might just be the line going in or the bleed extension I installed to aid
bleeding. If it is the slave cylinder it looks like the upper 9/16ths bolt
holding the slave is very close to the frame rail. Anyone done this?
Mike MacLean
60 Sprite
56 BN2
_______________________________________________
Edit your replies
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|