The length will be greatly affected, depending on where you have the cable
exit into the engine bay. If you have it exit next to the steering column,
it would need to be longer, than if it were to exit with the oil pressure
tube, IIRC
On Jan 28, 2008 1:59 PM, Peter C <peter@nosimport.com> wrote:
> Mssrs. Smith disagree stating all 948, 1098, 1275 should be 4' 6"
> Peter C.
> =======
> At 01:44 PM 1/28/2008, Timothy H. Collins wrote:
>
> >The speedo cable that came with my car when I bought it from the PO,
> >touched the exhaust pipe sometime in its history and melted the
> >exterior covering. It still works fine - it's just not "pretty" - and
> >we know how important that is, don't we! (Otherwise Ed wouldn't be
> >saving for six shooter door knobs!) <grin>
> >
> >I bought a barrel of MIdget parts from a cousin which included a
> >speedo cable but it is 6 inches shorter. I see that M and VB have two
> >cables - one for 1098 and one for 1275. I can't see why the extra
> >length is necessary as the relative positions of the tranny and
> >instrument are the same (I think). What's the list wisdom on using
> >the short cable in a 1098 car?
> >
> >Tim Collins
> >http://www.flickr.com/photos/12702006@N07/
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as tequila.brad@gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
>
--
DON JULIO 1942
www.myspace.com/tequilabrad
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|