spridgets
[Top] [All Lists]

Re: [Spridgets] Speedo Cable Interchange

To: spridgets@autox.team.net
Subject: Re: [Spridgets] Speedo Cable Interchange
From: "Timothy H. Collins" <thcollin@mtu.edu>
Date: Mon, 28 Jan 2008 17:45:12 -0500
Thanks again for the help folks! The cosmetically challenged cable 
is, of course, the correct length. (Thanks, Peter, but what do those 
cough drop guys have to do with LBC's?) Glen, I did try the heat 
shrink suggestion, but the piece I have available was a bit too small 
to slide over the small end. We tight hint. I bought a 4' section of 
heat shrink tube directly from an electrical contractor supplier. I 
paid about 1/4 the price of what others want when it is cut in 6" 
lengths and packaged in a little bag and hung on a hook in your 
favorite box store.
Thanks all!

At 02:44 PM 1/28/2008, you wrote:
>The speedo cable that came with my car when I bought it from the PO,
>touched the exhaust pipe sometime in its history and melted the
>exterior covering. It still works fine - it's just not "pretty" - and
>we know how important that is, don't we! (Otherwise Ed wouldn't be
>saving for six shooter door knobs!) <grin>
>
>I bought a barrel of MIdget parts from a cousin which included a
>speedo cable but it is 6 inches shorter. I see that M and VB have two
>cables - one for 1098 and one for 1275. I can't see why the extra
>length is necessary as the relative positions of the tranny and
>instrument are the same (I think). What's the list wisdom on using
>the short cable in a 1098 car?

Tim Collins
http://www.flickr.com/photos/12702006@N07/  
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>