spridgets
[Top] [All Lists]

Re: [Spridgets] It's always something

To: spridgets@autox.team.net
Subject: Re: [Spridgets] It's always something
From: Marc <smarc@smarc.net>
Date: Fri, 09 May 2008 11:29:33 -0400
Ok, a little sanity has prevailed - decided I'm going to limit the scope 
of the project for now. Rather then rush all this stuff and do a lame 
job, I'm going to get the car back into 'driver' form, and enjoy it over 
the summer. My MGB needs some TLC, and I gotta have at least one working 
(relatively) LBC for the summer.

I  expect the new wiring harness today, and I'm going to leave the 
heater box out of the midget for now, and I will putz around getting 
that refurbed this summer. Then I can experiment with a paint gun before 
having to do a more substantial project. I have done quite a bit of 
painting with rattle cans, and am able to get nice smooth finishes with 
them. I would guess a paint gun is more controllable then a spray can...

Marc



dlancer7676@comcast.net wrote:
> Marc:
>
> I have never done this, but I understand that some auto paint stores, like 
>NAPA, have computerized scanners that will scan a paint chip or painted body 
>part and come up with the specific formula for matching the paint.  Check it 
>out at your local NAPA store to see whether they have such a scanner.  Maybe 
>some listers have experience with that.
>
> --DAvid C.
> "Those who matter don't judge me ... those who judge me don't matter." -- 
>Anonymous
>
>  -------------- Original message ----------------------
> From: Marc <smarc@smarc.net>
>   
>> Well..... Since the heater box is out, the wiring harness is going to be 
>> out, and the engine is going to be out shortly, I'm stumbling down that 
>> road... thinking , "well, the engine bay is looking pretty ratty...." 
>> Wonder how bad I could screw up painting it myself..."
>>
>> As usual, I have more questions then answers... Looking to make up the 
>> shortfall here! :-D
>>
>> I expect clean up of the area to involve scrubbing, engine cleaner, 
>> degreaser, possibly pressure washer, scraping, sanding, swearing and 
>> bleeding...
>>
>> So, how DO you match up paint colors? I want the engine bay the same 
>> color as the car.
>>
>> Are the inexpensive paint guns at horrible freight up to the task of 
>> spraying the engine bay? This is by no means a show car, just a 
>> driver... I'm planning on using the rattle cans of green paint for the 
>> motor. Is there an appropriate shade of green in the off-the-shelf 
>> engine paint, or is the Moss product the best way to go?
>>
>> Marc
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>