spridgets
[Top] [All Lists]

Re: [Spridgets] Tie Rod End removal?

To: "'Hal Faulkner'" <hal@katemuir.com>, "'David Lieb'"
Subject: Re: [Spridgets] Tie Rod End removal?
From: "Guy Weller" <guy.weller@tiscali.co.uk>
Date: Sun, 11 May 2008 08:54:40 +0100
--===============1401996613==
Content-Type: text/plain; charset="windows-1250"
Content-Transfer-Encoding: 7bit

The reason this works so well isn't by magic, though it looks like it!

The pin is tapered and fits into the matching tapered hole in the steering
arm. The steel of the steering arm has a very slight degree of elasticity.
Well, I think all steel has. When hit with a BFH it compresses momentarily,
and then bounces back and at that instant the hole in the steering arm gets
fractionally bigger and it lets go.  Hitting in line with the steering arm
works. Two hammers works well if you time them to impact at exactly the
right moment and diagonally opposite each other. One hammer held whilst
hitting with the second works, but only produces half of the "bounce" and
may not release the pin so easily.

Guy

-----Original Message-----
From: spridgets-bounces+guy.weller=tiscali.co.uk@autox.team.net
[mailto:spridgets-bounces+guy.weller=tiscali.co.uk@autox.team.net]On Behalf
Of Hal Faulkner
Sent: 11 May 2008 06:56
To: David Lieb; Spridgets
Subject: Re: [Spridgets] Tie Rod End removal?

At the Buster Cluster Peter C. amazed me with exactly this technique!  One
good rap with the hammer and, voila!  I won't say it's the slickest thing
I've ever seen, but it was damn amazing.

Hal

.... simply hit it smartly in line with the steering arm with a 1-pound
ballpeen hammer and watch in amaze as the TRE drops nicely out of place.
You are subscribed as guy.weller@tiscali.co.uk

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 269.23.14/1425 - Release Date: 09/05/2008
12:38

Checked by AVG.
Version: 7.5.524 / Virus Database: 269.23.14/1425 - Release Date: 09/05/2008
12:38

--===============1401996613==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

--===============1401996613==--

<Prev in Thread] Current Thread [Next in Thread>