spridgets
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Spridgets] Tie Rod End removal?

from [derf] [Permanent Link][Original]
To: rrengineer@dslextreme.com
Subject: Re: [Spridgets] Tie Rod End removal?
From: derf <derf247@gmail.com>
Date: Mon, 12 May 2008 20:40:16 -0600 
I used the hammer method on a 73 Super Beetle tie rod ends about an
hour ago.  It works fine.  The fork tends to tear the rubber boot.
Tie rod tools are good and HF has them pretty cheap, too.
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Spridgets] Glass Polishing, Marc
Next by Date:  [Spridgets] Bugeye Ground Strap Question, Miniac7
Previous by Thread:  Re: [Spridgets] Tie Rod End removal?, rrengineer
Next by Thread:  [Spridgets] 52 Austin Champ, RampantNM
Indexes:  [Date] [Thread] [Top] [All Lists]