Umm, apparently it just didn't like my battery charger....
Marc
Marc wrote:
> Hi!
>
> I screwed something up, and my wiring diagrams are lame (apparently so
> is my eyesight...)
>
> Got new harness in, one last checkout (on battery charger, 2 amp
> setting) before I hook the battery up & try it out. When I energize the
> ignition, the tach swings to about mid-scale (engine not running). I
> have the white/black connected to the bullet connector on the back of
> the tach, the green spade on the terminal right next to the white/black.
> Theres a few black ground wires on a ring terminal, they are attached to
> the mounting post. There is a ground terminal directly on the case of
> the tach, but that was never used originally...
>
> So, does that green wire NOT go there?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|