spridgets
[Top] [All Lists]

Re: [Spridgets] Air pump ports

To: "Hal Faulkner" <hal@katemuir.com>, "Deikis, John G"
Subject: Re: [Spridgets] Air pump ports
From: "Larry Daniels" <ladaniels@sbcglobal.net>
Date: Thu, 21 Aug 2008 18:42:16 -0500
Yeah, the 7/16 - 20 X 1/2 is for the B-series head.

LAD

----- Original Message ----- 
From: "Hal Faulkner" <hal@katemuir.com>
To: "Deikis, John G" <John.Deikis@va.gov>; "Spridget List" 
<spridgets@autox.team.net>
Sent: Thursday, August 21, 2008 1:06 PM
Subject: Re: [Spridgets] Air pump ports


The ports on my head are 1/8 x 27 NPT.  Allen head plugs are available at
your friendly local ACE hardware.

Hal


-----Original Message-----
From: spridgets-bounces+hal=katemuir.com@autox.team.net
[mailto:spridgets-bounces+hal=katemuir.com@autox.team.net]On Behalf Of
Deikis, John G
Sent: Thursday, August 21, 2008 6:35 AM
To: Spridget List
Subject: [Spridgets] Air pump ports


I want to put allen head plugs into the abandoned emissions air pump
ports in a de-smogged 1275 head.

I seem to remember they are threaded 7/16-20 UNF but am not sure.

Can someone verify for me what will thread in there, or will I need to
drill and tap to another size.

The last time I did this, the head I was working on was not in the car
and I neatly closed up the ports with nifty Allen set screws or pipe
plugs that fit flush and don't look "cobbled."

Suggestions?
You are subscribed as ladaniels@sbcglobal.net

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets 
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>