Nope. The B series head uses the same size as the A series.
Dunno where the idea of 7/16 x 20 came from. 7/16" is a pretty damn big
hole, actually. FAR too large for an air injection nozzle on a
small-bore engine like an A or B series.
Bud Osbourne
-----Original Message-----
From: spridgets-bounces+abcoz=hky.com@autox.team.net
[mailto:spridgets-bounces+abcoz=hky.com@autox.team.net] On Behalf Of
Larry Daniels
Sent: Thursday, August 21, 2008 6:42 PM
To: Hal Faulkner; Deikis, John G; Spridget List
Subject: Re: [Spridgets] Air pump ports
Yeah, the 7/16 - 20 X 1/2 is for the B-series head.
LAD
----- Original Message -----
From: "Hal Faulkner" <hal@katemuir.com>
To: "Deikis, John G" <John.Deikis@va.gov>; "Spridget List"
<spridgets@autox.team.net>
Sent: Thursday, August 21, 2008 1:06 PM
Subject: Re: [Spridgets] Air pump ports
The ports on my head are 1/8 x 27 NPT. Allen head plugs are available
at
your friendly local ACE hardware.
Hal
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|