There's also a grease nipple on the handbrake cable.
Clay L.
-- Lester <oldsaabguy@comcast.net> wrote:
Ok, it's that time of year so I am under the Bugeye for it's first-
since-assembly lubrication and I find:
One grease nipple on the outer tie rod
One grease nipple on the lower fulcrum
One upper and one lower on the suspension king pin.
First question is what am I missing?
Second is as I watch grease squirt out of only the front half of the
fulcrum (between the A arm and kingpin mount) do I understand that to
mean that I have to disassemble the entire thing again to figure out
why the grease won't go past the kingpin?
Thanks as always,
Lester
You are subscribed as cclabaw@juno.com
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
____________________________________________________________
Click here for a free search to find an interior design school near you.
http://thirdpartyoffers.juno.com/TGL2141/fc/Ioyw6i3oLOnwOi2N6GH83PLn3z3ygGY43
NFmOz4wbJc7LyGt5CYHTG/
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|