spridgets
[Top] [All Lists]

Re: [Spridgets] Interior Panel straightening

To: "'Mark Haynes'" <haynes386@netzero.net>, <spritenut@comcast.net>
Subject: Re: [Spridgets] Interior Panel straightening
From: "Leo" <60bugeye@cebridge.net>
Date: Tue, 7 Oct 2008 19:49:55 -0500
--===============1417418320==
Content-Type: text/plain; charset="windows-1250"
Content-Transfer-Encoding: 7bit
Content-Language: en-us

Use them as patterns:)

Leo

-----Original Message-----
From: spridgets-bounces+60bugeye=cebridge.net@autox.team.net
[mailto:spridgets-bounces+60bugeye=cebridge.net@autox.team.net] On Behalf Of
Mark Haynes
Sent: Tuesday, October 07, 2008 11:19 AM
To: spritenut@comcast.net
Cc: spridgets@autox.team.net
Subject: [Spridgets] Interior Panel straightening

Hey Bugeye guys,
I remember that someone (possibly Frank?) at one time had all of the
patterns
for the interior panels(or do I misremember?) of a BE. I have the original
panels for my '58, but the weather and water have made them sag. For
example,
the door sill panels (under the doors) slid down onto the floor
and then took the curved shape as they rested on the floor and the sill. The
adhesive for the panel covering is toast, but the covering is relatively OK,
so my question is this, can the fiberboard be resoaked in water and pressed
flat again, or should I just do this and try to use them as patterns for
masonite replacement?

Mark Haynes
HAN6L12779
HAN5L8016

____________________________________________________________
Gain financial freedom! Click here for Financial Advice.
http://thirdpartyoffers.netzero.net/TGL2231/fc/Ioyw6ijmNb2bc8vukIB6cuJqSyTuc
g
kWWyqWr1SsVGxgEVrFxDOc3a/
You are subscribed as 60bugeye@cebridge.net

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 270.7.6/1712 - Release Date: 10/7/2008
9:41 AM
 

Checked by AVG. 
Version: 7.5.524 / Virus Database: 270.7.6/1712 - Release Date: 10/7/2008
9:41 AM

--===============1417418320==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

--===============1417418320==--

<Prev in Thread] Current Thread [Next in Thread>