spridgets
[Top] [All Lists]

Re: [Spridgets] HEater fan

To: <spridgets@autox.team.net>
Subject: Re: [Spridgets] HEater fan
From: "Ed's Shop" <shop@justbrits.com>
Date: Mon, 8 Dec 2008 19:31:53 -0600
Dave...

<<It looks like it might work, but its backwards....>>

withOUT spending a bunch of time I don't have searching for pics, I 'would'
say that if you mean for a UK Spec car;  YEP.

For a US SPEC car it 'might' work with some sort of double right-angled HARD
plastic "plenum" for between the output (now at bottom & next to body) to
the heater input (WAY above) which would have to be quite THIN.

As Glen noted <quote>the view is into the squirrel cage.</quote>

Ergo, it's usage would require that it be mounted UPSIDE down (right Glen?).

Then ADD Frank's note the 4" INTAKE with 3" OUTPUT does make it a
'tad' more "difficult"<G>.
Also (as Frank noted)  <quote>You can turn it around...</quote> but (IMHO)
the required "plastic" plenums which would be REQUIRED, would make it's use
a bit on the EXPENSIVE side.

LAD & DL
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>